Stakes & Risers
Adaptor - 10/10mm for collar pipe stakes |
Adaptor - 10/13mm for collar pipe stakes |
Adaptor - 10/5mm for collar pipe stakes |
||
Adaptor - 10mm x 5mm accepts 5mm rod |
Adaptor - Threaded 15/10BSP x 10mm Barb |
Adaptor - Threaded 15/10BSP x 10mm Barb - 200 kpa |
||
|
Adaptor - Threaded 15/10BSP x 5mm Barb |
Adaptor - Threaded 15/10BSP x 5mm Barb - 150 kpa |
Adaptor - Threaded 15/10BSP x 5mm Barb - 200 kpa |
||
Collar Only - Accepts SA1010/13/5 |
Collar Pipe Stake - 10mm BSP x 10mm Tail |
Collar Pipe Stake - 10mm BSP x 13mm Tail |
||
|
Collar Pipe Stake - 10mm BSP x 5mm Tail |
Galvanised Rod 100cm x 5mm |
Galvanised Rod 100cm x 6mm |
||
|
Galvanised Rod 120cm x 8mm |
Galvanised Rod 150cm x 5mm |
Hose Staple - Galvanised 5" |
||
|
Hose Staple - Galvanised 9" |
Lead Weight for Dropper Tube |
Rigid Riser - 200mm (adaptor fitted) |
||
|
Rigid Riser - 300mm (adaptor fitted) |
Rigid Riser - 450mm (adaptor fitted) |
Riser - 15mm BSP x 1200mm |
||
|
Riser - 15mm BSP x 150mm |
Riser - 15mm BSP x 300mm |
Riser - 15mm BSP x 600mm |
||
|
Riser - 15mm BSP x 900mm |
Riser - 20mm BSP x 200mm |
Riser - 20mm BSP x 300mm |
||
|
Riser - 25mm BSP x 300mm |
Riser - 25mm BSP x 450mm |
Riser Stake - 200mm |
||
|
Riser Stake - 310mm |
Riser Stake - 420mm |
Riser Stake - 530mm |
||
Snap on Pipe Stake - 13mm |
Snap on Pipe Stake - 19mm |
Snap on Pipe Stake - 4mm |
||
Spike for Microtube 3.0mm O.D. - Red |
Stake - Accepts MSA Adaptor |
Stake with adaptor (Accepts jet/rotor spray direct) |
||
Stake with adaptor - suit 4mm/5mm tube |
Stake without adaptor - suit 4mm/5mm tube |
Threaded Stake - 10mm barbed entry |
||
|
Threaded Stake - 13mm barbed entry |
Threaded Stake - 5mm barbed entry |
Threaded Stake - 5mm barbed entry Orange |
||
|
Threaded Stake c/w 5mm Tube (60cm) & fitting |
Threaded Stake c/w swivel elbow, 10mm barbed entry |
